Why a price list alone tells you very little

You set a price, a competitor moves, a marketplace changes its fees, and nobody checks the whole list again until margin starts to fall. Sales still look healthy, yet profit is shrinking, and the team cannot say which products are carrying the business and which are quietly losing money.

The usual response is to change prices by feel. A product that sells fast is nudged up. A product that sits in the warehouse is cut. Each move looks reasonable on its own, but together they can leave a list with no clear logic. Customers may see the range as confused, and rivals may find it easy to undercut the lines that matter most.

A price map gives the list a shape. It places each product, or product group, against three reference points: the prices customers can see elsewhere, your full cost to serve, and the value the product gives the buyer. Once those points are visible together, the decisions become concrete rather than a matter of opinion.

Whether a line should sit on a marketplace or on your own site is a separate question, covered in marketplaces or your own site for ecommerce. This guide assumes you already sell through one or both, and focuses on the prices themselves. It walks through how to gather public price data, how to build the map, how to read it and how to decide what to do with each product.

Gather public price data carefully

Start with a clear list of the products to map. Choose the lines that matter most by revenue or margin, plus any lines that compete directly with rivals on the same marketplace. A map of two hundred products is hard to read. A map of thirty well-chosen lines is usually enough to make good decisions.

Then collect the public prices. Useful sources include competitors' own product pages, their listings on marketplaces, and the prices shown on comparison sites where those exist. Record the price, the date, the pack size, any delivery charge and whether the price is a standard price or a promotion. A price without context misleads, so note exactly what you are comparing.

For each price, record:

  • Product name, pack size and variant, so that like is compared with like.
  • The price a typical customer sees, with the date and time recorded.
  • Delivery cost, minimum order value and any membership or subscription price.
  • Whether the price is a standard price, a promotion or a deal specific to one marketplace.

Collect the data the same way each time. Use the same checklist, the same sources and, where possible, the same person. Repeat the check on a fixed schedule, such as monthly, so that changes show up as trends rather than one-off snapshots that may reflect a short promotion.

Some things should not be done. Do not contact competitors to agree prices or to exchange pricing plans, because that can breach competition law. Do not use tools that break the terms of use of a site, and do not try to reach areas that are closed to the public. Stick to what any customer could see when they visit. If you are unsure whether a method is acceptable, take advice before you automate it, not after.

Build the map: price against cost and value

A simple map has two axes. The horizontal axis shows your price relative to the market, from the lowest competitor price to the highest. The vertical axis shows your contribution margin, meaning what is left after the cost of the product, fees, delivery and returns. Each product becomes a point on the chart. Products in the top right are priced well and earn well. Products in the bottom left need attention.

Work out margin after every cost a marketplace or delivery adds. A product that looks profitable at the list price can become loss-making after commission, payment fees, packaging, postage and a share of returns. Use the real costs, not the figures used when the product was first launched, because those are often out of date.

Add a value check, because price is only half the story. Ask what the buyer gets that a cheaper rival does not provide, such as faster delivery, a stronger guarantee, a clear sizing guide or proof that the product works for a specific use. Score each product's value on a simple scale from low to high, based on evidence such as reviews, return reasons and questions from customers, rather than on how you feel about the product.

Illustration: suppose a business sells a kitchen gadget in three sizes. The mid-size model sells at £40 and leaves £9 a unit after fees and postage. In this illustration, similar products sell from £32 to £46. The small model sells at £26 and leaves £2 a unit. The large model sells at £60 and leaves £22 a unit. The business's own target is £14 a unit. On the map, the mid-size model sits in the middle of the market below target margin, the small model sits in the bottom left, and the large model sits in the top right. The figures are invented to show the method, not a benchmark.

Read the map: four patterns to look for

Once the points are plotted, look for patterns rather than single points. Four patterns come up most often:

  • Overpriced lines: priced well above the market, with weak evidence of extra value. Buyers are likely to compare and move on.
  • Underpriced lines: priced at or below the bottom of the market, while the value is strong. These may be giving away margin that customers would have paid.
  • Gaps in the market: price points where few competitors sit and where your product could fit. A gap is useful only if buyers want that price point and your cost base can meet it.
  • Loss-making lines: products that lose money once fees, delivery and returns are included, even though they look profitable at the list price.

Pay most attention to the loss-making lines, because they are the easiest to fix and the easiest to miss. A product that sells well but earns nothing can make the whole range look healthy. Sort the list by contribution after all costs, rather than by sales volume, and look at the bottom of the list first.

Watch for false signals. A product that sells slowly may be overpriced, but it may also have a weak listing, poor photography or a poor review history. Check those causes before you cut the price. Similarly, a product that sells fast may be underpriced, or it may be benefiting from a short promotion or a seasonal peak.

Finally, check the map against your own history. If you cut a price in the past and volume rose, record how much and for how long. If volume fell after a rise, note how long the drop lasted and whether margin improved. Your own data shows how your customers respond to price changes, which is more useful than general advice from outside.

Decide the action for each product

For each product on the map, choose one of four actions: hold, test, reposition or drop. Write down the reason and the measure beside each decision. An action without a measure is an opinion.

Hold means the product is priced well for its position and margin. Keep it under review, but do not change the price for the sake of it. Test means the evidence is unclear, so run a controlled price change on a small number of products, or a short promotion, and compare the result with a group that did not change. Reposition means the value is not visible enough to support the price, so change the message, the bundle or the proof before changing the price. Drop means the product cannot earn an acceptable margin at any realistic price, and it is taking attention from better lines.

Set a simple rule for each action. For example: a product that earns below your target margin for two months in a row moves to test. A product that stays in the bottom left after a test moves to reposition or drop. Rules like these stop decisions being made in a rush, and they make the next review faster.

Apply this to the illustration. The large model would be held, since it sits above target. The mid-size model would be tested, perhaps by changing the postage charge or the bundle, and compared with a control. The small model would be repositioned if its value can be shown more clearly, or dropped if it cannot earn its margin at any realistic price.

Be careful with price tests on marketplaces. Some platforms restrict how you can change prices or show promotions, and buyers notice price changes. Read the platform rules before you test, and keep the test simple enough to explain to a colleague in one sentence.

Plan the next step: map, decide and review

Start with one product group, not the whole range. Choose a group where margin is a known concern and where you have clean cost data. Build the first map in a single working session with whoever owns pricing, the person who manages the marketplace listings and finance. Agree the axes, the cost basis and the four actions before you look at the points, so that the discussion stays on decisions.

Next, put the actions in a short list with an owner and a review date for each. The list should be small enough to act on within a month. Include the reason for each action and the measure that will show whether it worked, such as contribution per unit, units sold or conversion rate on the product page.

Then review the results on a fixed schedule. Compare each test with its control, look at margin as well as volume, and check for side effects such as more returns or a drop in reviews. Record what you learned, even when a test fails. A failed price test that rules out a route is still useful.

Keep the map alive. Competitors move, costs change and fees are revised. A monthly update of the key lines and a fuller review each quarter will keep the map useful. The aim is not a perfect price list. It is a list you can explain, defend and change with confidence.

The practical next step is to pick the product group with the weakest margin, collect its public prices and true costs this month, and build the first map before the next pricing decision is made. For more on the commercial side of online selling, see the ecommerce sales page.

See where your price list is losing margin

If your range has grown without a clear pricing logic, book a discovery call. We will look at your product list, your costs and your marketplace fees with you, and agree a first set of lines to map and test.

Book a discovery call

Questions and answers

Is it acceptable to collect competitor prices from their websites?

Collecting prices that any customer can see is generally a normal part of market research. Keep the collection manual or within the terms of use of the site, and do not access closed areas. Never agree prices or exchange pricing plans with competitors, as that can breach competition law. If you are unsure, take legal advice before you automate collection.

How long should a price test run?

Long enough to cover normal buying patterns and a few reorders, not just a busy weekend. For many products that means several weeks, and longer for items bought rarely. Set the end date and the success measure before you start, and watch margin and returns as well as volume. Stop early only if the test is causing clear harm.

Should we always match the lowest competitor price?

No. Matching the lowest price can lock you into the weakest margin in the market. A price that is lower than rivals may be right for a commodity line, but for a product with strong value it can give away money. Decide on your margin target first, then check whether the customer sees enough extra value to pay your price. Match only where the economics support it.

What data do we need to find loss-making products?

You need the selling price, the cost of the product, the marketplace or payment fees, the delivery and packaging cost, and an estimate of returns. Add them together for each product and compare the total with the price the customer pays. Include the costs that appear after the sale, because they are easy to leave out of the first calculation.