Why pricing feels hard to defend
Your price was set when the business was smaller, or copied from a rival, or worked out from the hours a job took last time. Now a client asks why the fee is what it is, a new piece of work is quoted at a lower rate by someone who wants it badly, and the team is not sure whether the price is too high, too low or simply unexplained. That uncertainty is the real problem, and the price itself is only the symptom.
A price you cannot defend causes three kinds of damage. It invites haggling, because the buyer sees no reason the number is fixed. It hides margin, because the team does not know which jobs or products earn what. And it makes change hard, because every increase feels like a risk with no evidence behind it.
Good pricing strategy deals with those three problems. It makes a clear choice about the basis of the price, builds a structure the buyer can follow, and gives you a way to test changes before you roll them out to everyone. The steps below cover each of those in turn, for agencies, professional services firms and manufacturers that sell on price, value or a mix of the two.
If you have not yet looked at where your current prices sit against the market, that is a useful first step. It is covered in price mapping, and it gives you the market view that the rest of this guide assumes.
Choose the basis for your prices
Every price rests on one of three bases, or a mix of them. Each is useful in some situations and dangerous in others.
- Cost-based: price is cost plus a margin. It is simple, protects against loss and suits work where cost is predictable. It ignores what the buyer would pay, so it can leave money on the table or price you out of the market.
- Competitor-based: price is set against what rivals charge. It is easy to explain and suits work where buyers compare like with like. It can start a price race, and it says nothing about the value you add.
- Value-based: price reflects the outcome the buyer gets, such as more qualified enquiries or less waste, measured in the buyer's own terms. It can support higher margins, but it needs evidence of the outcome and a clear view of what the buyer values.
Most businesses should use cost as a floor, competitor prices as a reference and value as the main guide. Cost tells you the lowest price that does not lose money. The market tells you the range buyers already expect. Value tells you where within that range your price can sit.
Use cost-based thinking where delivery is standard and buyers compare like with like. Use value-based thinking where the outcome is large and measurable, such as a process change that cuts scrap or a campaign tied to a sales target. Many professional services sit in between, where the scope and risk of each job vary, and the price should reflect that difference. If your work is still billed job by job, turning project fees into retainers covers the fee side of that shift.
Write down the basis you are using for each product or service. If the answer is "we have always charged this", the basis is history, and that is the first thing to review.
Build a price structure buyers can follow
A price structure is the set of options a buyer chooses from. A single price forces a yes or no. A small set of clear options lets the buyer choose the level that fits their need, and it gives you a natural way to offer more value at a higher price.
The good, better, best model is the most common shape. The good option meets the core need at the lowest workable price. The better option adds the features or service most buyers want, and is often the one you hope most people choose. The best option adds what the most demanding buyers need, such as priority support, extra reporting or a dedicated lead.
Keep the structure small. Three options are usually enough, and each should differ by something the buyer can name in one sentence. Avoid long lists of add-ons that make comparison hard. Check that the middle option is priced to be attractive, rather than a weak choice between two extremes.
To build one, work through these steps:
- List the outcomes the buyer wants, and the features or service that deliver each one.
- Group those features into three levels, based on how much each group of buyers needs.
- Price the middle level on the value it delivers, then set the other two around it.
- Check the cost of delivery at each level, so that the best option still earns a margin.
Illustration: suppose a manufacturer of industrial filters offers a maintenance plan in three levels. The good plan costs £1,200 a year and covers one service visit. The better plan costs £2,100 and adds two more visits and priority parts. The best plan costs £3,400 and adds a monitored spares stock and a named engineer. The aim is for the better plan to be the natural fit for most customers, which is a test of whether the middle level is priced correctly. These figures are invented to show the shape, not a benchmark.
Test prices safely before you change them for everyone
A price change is an experiment on your revenue. Many businesses test in a crude way, raising a price for everyone on the same day and watching the figures. That makes it hard to tell whether a fall in volume came from the price, the season or a rival's promotion. Safer tests have a control group, a defined limit and a clear measure.
There are three common routes. A landing page test shows two prices or price structures to separate groups of visitors and compares conversion. It suits new offers that go through a web form. A controlled rollout applies the new price to a defined group, such as new customers in one region or one service line, while everyone else stays on the old price. A proposal test offers the new structure to a small number of prospects and tracks the win rate against the standard offer.
Set guardrails before the test starts. A guardrail is a limit that stops or pauses the test if it goes wrong. Examples include a minimum margin per job or unit, a maximum fall in volume, a cap on discounts or refunds, and a rule for pausing the test if complaints rise. Write the guardrails down, and agree in advance who can stop the test.
Keep the test fair. Showing different prices to similar customers can damage trust if they find out. Check the consumer rules before you run that kind of test, and keep records of what each group was shown and when. Never change the price on a quote a customer has already accepted.
Give each test a fixed end date. Decide in advance how long the test will run and what result would count as success, so that you do not stop early because the first week looks good, or extend it because the result is not what you hoped for.
Explain a price change so customers accept it
A price rise is easier to accept when the customer can see what has changed and why. Start with the reason in plain terms. If costs have risen, say which costs. If the scope has grown, show the new scope. A vague note that prices are changing with immediate effect invites complaints and shortens the conversation you need to have.
Give notice where you can. A date several weeks ahead gives clients time to plan their budgets and gives your team time to respond. Tell existing customers before prospects, and keep the message short and specific. Send it from a named person who can answer questions, rather than from a general inbox.
Offer a choice where you can. If you have a price structure, show the customer which option matches their need now, and what changes if they stay where they are. That turns a price rise into a decision the customer makes, rather than a bill they receive.
Prepare the team. Sales and account staff need the same reason, the same numbers and a clear answer to the most likely challenge. A short script and a list of questions with approved answers will stop people making promises the business cannot keep. Be honest about what you will and will not move on.
If you send the notice by email to individual customers, UK GDPR and PECR apply. Keep the message to the change itself, and check it against those rules before it goes out.
Measure the result and decide what to do next
A price change that raises revenue can still be a poor decision. Measure three things together: margin, volume and customer quality. Margin shows whether the business keeps more from each sale. Volume shows whether the change lost buyers. Customer quality shows whether the buyers you keep or win are the ones you want, judged by repeat orders, payment times, complaints and renewals.
Illustration: suppose a manufacturer sells 200 units a month at £40 each, with a unit cost of £28. That gives a contribution of £12 a unit, or £2,400 a month. Raising the price to £44 lifts contribution to £16 a unit. Contribution stays the same at 150 units, so the change pays off unless volume falls by more than a quarter. At 170 units, contribution rises to £2,720 a month. These figures are invented to show the arithmetic, not a benchmark.
Keep the measures that match the decision. For a service business, track realisation, which is the share of agreed fees actually collected, and the share of clients who renew. For a manufacturer, track margin by product, order size and repeat orders. Set a review point, usually after one full buying cycle, and decide in advance what result would lead to a further change.
Watch for hidden costs. A higher price can bring more negotiation time, more disputes or more pressure on the delivery team. These costs do not show up in the revenue line, so add them to the review, even if they are only noted in a short list.
The practical next step is to choose one product or service line this quarter. Write down its current basis and structure, run one controlled test with clear guardrails, and set the measures and the review date before you start. A single well-run test will teach more than a debate about the whole price list.
Set a price you can defend and test
If your prices have not been reviewed in a while, book a discovery call. We will look at your current basis, your margins and the tests you could run safely, and agree where to start.
Book a discovery callQuestions and answers
Which pricing method should we use?
Most businesses should combine methods rather than pick one. Use cost as the floor, so no sale loses money. Use competitor prices as a reference for what buyers expect. Use value as the main guide where the outcome is clear and measurable. Write down the reason for the method used for each product or service.
How do we test a price without upsetting customers?
Test with a clear reason and a small, defined group, such as new prospects or one service line. Do not change prices for existing clients in the middle of an agreed term. Set guardrails on margin and volume before you start, keep records of what each group saw, and be ready to explain the change honestly if anyone asks.
How much notice should customers get before a price rise?
There is no single rule. The right notice depends on your contracts and on the budget cycle of each customer. Where you have a written agreement, check its terms first. As general practice, give existing customers enough time to plan, often several weeks, and explain the change with the reason and the new figures in plain language.
What is the simplest way to measure a price change?
Compare contribution, which is revenue minus the costs that change with each sale, before and after the change. Track volume alongside it, and add one measure of customer quality, such as repeat orders or renewals. Use the same period length on each side and, where you can, a control group that did not see the change. Simple comparisons are easier to trust than complicated models.