Why marketing and sales disagree about the same month
The monthly meeting often follows a familiar pattern. Marketing shows enquiries, form fills and cost per lead, and the figures look healthy. The sales team replies that the enquiries are not what it expected, that many were not buyers, and that the good ones were slow to be followed up. Nobody has agreed what a lead is, so each side is right about its own numbers and unconvinced by the other's.
This pattern has a cost. Marketing keeps spending on the channels that produce the most volume. Sales spends its time on enquiries that rarely turn into revenue. Each team concludes that the other is the problem, and the business loses momentum while the argument runs.
The fix is not to pick a winner. It is to agree the rules first, so that both teams measure the same thing, in the same place, in the same way. The rest of this guide covers how to do that step by step.
Alignment does not need a reorganisation. It can start with one meeting, four definitions and a shared report. The aim is simple. When someone says a lead was won or lost, everyone should know what that means and where to check it.
Agree written definitions before you measure anything
Start with four definitions. Write them down, agree them between sales and marketing, and keep them to a single page. A definition that needs a long explanation is hard to apply consistently. The sales lead should sign off the stages that describe how deals move. The marketing lead should sign off the stages that describe how leads arrive.
The four definitions to agree are:
- Lead: a named contact who has given details or asked for information about your products or services.
- Qualified lead: a lead that meets your agreed tests, such as a stated need, a buyer with budget or authority to decide, and a timeframe for action.
- Opportunity: a qualified lead that sales is actively working, with a named next step and a date.
- Win: a signed contract or order, recorded with its value and the date it was agreed.
The qualification tests are the part most likely to cause argument, so spend time on them. Choose a short list that sales can apply on the first call. Add a reason code for every lead that does not qualify, so the definition can be improved later. Write one example lead for each outcome, so the team can see how the rule works in practice.
Agree what happens to leads that do not qualify. Some should go into a nurture stream, some should be declined and some may suit a partner. Write the rule down. A lead that quietly disappears from the record is one that nobody can learn from.
Test the definitions against real data before you adopt them. Take the last three months of leads and see how many would meet the new tests. If the answer is none or all, the tests need changing before the team relies on them.
Set working agreements for response, hand-off and feedback
Definitions tell you what the numbers mean. Working agreements tell you how the two teams behave around them. Three agreements cover most of the day-to-day friction: response times, what marketing sends and what sales feeds back.
Start with response time. Agree how quickly sales will contact a new lead after it arrives, and what happens when that target is missed. The right figure depends on your sales model, so agree it rather than copying someone else's. Whatever the target, the rule should be visible in the CRM, not kept in people's heads. For the wider hand-off from first call onwards, the agency sales process from first call to retainer sets out the steps in more detail.
Next, agree what marketing sends. Each lead should arrive with the same set of fields:
- Source and campaign, so sales can see which activity produced it
- The question or need the contact described
- Company, role and location, where the form or data allows
- The page or document they engaged with
- Consent status, recorded in line with your privacy notice
Consent and data handling need care. Personal data is covered by UK GDPR. Electronic marketing to individuals is covered by PECR, and the rules differ for individual and business contacts. Check with your data protection lead or a suitably qualified adviser before you share or use contact lists, and do not pass on data you are not entitled to use.
Last, agree what sales feeds back. Set a short list of outcome codes, such as not qualified, no current need, lost on price, lost to another supplier and won. Sales records the code, with a short note, within an agreed time after each outcome. Without that feedback, marketing has no way to learn which leads were worth the effort.
Share one pipeline view and one set of numbers
One pipeline means one place where every lead, opportunity and win is recorded, using the agreed definitions and stages. It can be a CRM report, a shared dashboard or a well-kept spreadsheet. The format matters less than the rule that both teams use it and nobody keeps a private version.
Give the pipeline one owner, usually the sales lead or an operations manager, and agree when it is updated. A weekly update suits an active sales team, and the monthly review uses the same figures. Each stage should also have an exit rule that says what has to be true before a lead moves on.
Suppose marketing reports 80 leads in a month. Applying the qualification tests, 40 are qualified. Sales works 25 of those as opportunities, and six are won. This is an illustration only. The numbers do not contradict each other. They describe the same route at different points, and the drop at each stage shows where the conversation should go. Here the steepest fall is between opportunity and win.
Without a shared view, the two teams keep quoting different totals. Marketing counts the enquiries that arrived. Sales counts the ones it is working. The shared pipeline lets both see the same route, so an argument about lead quality becomes a question about the stage where leads drop out, and what to do about it. For the wider planning side, see how to plan pipeline for manufacturing sales.
Use one set of headline numbers in every report. Stick to the stages and measures you agreed, and show marketing-sourced results alongside results from other sources. If a figure is not in the shared view, it should not be used in the meeting.
Run a monthly joint review and use sales feedback
Hold a joint review once a month. Keep it to about forty-five minutes, with the sales lead, the marketing lead and whoever owns the pipeline data. Use a fixed agenda: pipeline movement since the last review, reasons deals were lost, questions prospects asked, campaigns that ran and what they produced, and the decisions for next month. Each decision needs an owner and a date. Share the pipeline view a day or two before the meeting, so the discussion is about what the numbers mean rather than whether they are right.
Sales feedback is the most useful input marketing has. Ask the sales team to bring the questions it hears most often, the objections that come up on calls and the phrases buyers use to describe their problem. Those are the raw material for better content, clearer messages and more relevant campaigns.
Turn that feedback into specific work. If prospects keep asking how a process works, the answer may belong on a page the buyer can find before the first call. If lost deals keep citing the same reason, the message or the qualification tests should change. Track each change against the stage it is meant to move, so that the next review can judge it.
Be careful with testimonials and examples. Only use a customer story, figure or quote that the customer has approved and that is accurate. Sales feedback should shape what marketing says. It should not put words into a customer's mouth.
Keep the tone of the review constructive. The question is not who failed. It is what the pipeline shows and what the next step should be. A shared review is where blame gives way to evidence, and that is what makes it worth the time.
Resolve common friction and measure the alignment
Most friction comes back to a small set of problems. Marketing sends volume and sales wants quality. Sales does not record outcomes, so marketing cannot learn from them. Targets are set separately, so each team is judged on a number the other cannot influence. Leads sit untouched for days because nobody owns the first call.
Each of these has a practical fix. For volume against quality, agree the qualified lead definition and tie marketing targets to qualified leads rather than raw enquiries. For missing outcomes, make recording part of the working agreement and check it in the monthly review. For separate targets, set one shared pipeline goal and agree which share each team is responsible for. For untouched leads, name an owner and a response limit, and report any breach.
Measure the alignment as well as the results. Useful measures include the share of leads that meet the qualified definition, the share contacted within the agreed response time, the share of opportunities with a recorded next step, the share of lost deals with a recorded reason, and the proportion of pipeline from marketing sources. None of these is a sales result on its own. Together they show whether the system works.
Watch for the wrong target. A target on the number of leads will push volume. A target on the number of wins alone may push sales to close early or to chase deals it should drop. Choose measures that both teams can influence and that point at the same outcome.
What to do next: this month, agree the four definitions and the response target, and write the working agreements on one page. Build one shared pipeline view, even a simple one, and hold the first joint review with sales and marketing in the room. Choose one friction point to fix first, give it an owner, and check the result at the next review.
Get sales and marketing working from one set of numbers
If sales and marketing disagree about what the numbers mean, book a discovery call. We will look at your lead definitions, your hand-offs and your pipeline view with you, and agree the first change to make.
Book a discovery callQuestions and answers
What is the difference between a lead and a qualified lead?
A lead is a named contact who has asked for information or given their details. A qualified lead has passed your agreed tests, such as a stated need, a buyer with budget or authority, and a timeframe. Keeping the two separate lets marketing report volume honestly and lets sales focus on the contacts most likely to buy.
Who should own the definitions of lead and opportunity?
Both teams should agree them, but one person should own the written version and keep it up to date. Sales should sign off the stages that describe how deals move. Marketing should sign off the stages that describe how leads arrive. Review the definitions every quarter, or sooner if the data shows they are not working.
How often should sales and marketing meet?
A monthly joint review is a sensible starting point for most businesses. Use the same pipeline view and agenda each time, and add shorter weekly check-ins during a busy launch or sales push if needed. The aim is to agree decisions and owners, not to report figures that nobody has checked in advance.
What should we do if sales does not record outcomes?
Make recording part of the working agreement, with a short list of outcome codes and an agreed time limit for entering them. Check the records in the monthly review and raise missing entries with the owner. If the system is hard to use, simplify the fields rather than accepting gaps in the data.